LIGHTING AND SHUTTING DOWN PILOT
1.Turn on main gas supply.
2.Turn burner valve ON and purge air from line. Turn burner valve OFF.
3.Wait 5 minutes, then turn burner valve ON and depress ignition button. Using a lit taper, ignite oven pilot (Fig. 5). Continue to hold button in for approximately 30 seconds, then release.
4.If pilot goes out, turn burner valve off and wait 5 minutes before relighting.
5.Repeat this procedure until pilot stays lit.
6.Set thermostat to desired temperature.
Lighting instructions also may be found on the oven control panel.
OVEN PILOT LIGHTER
Fig. 5
Shutdown
1.Turn burner valve OFF.
2.Turn thermostat OFF.
Extended Shutdown
1.Turn burner valve OFF.
2.Turn thermostat OFF.
3.Turn main gas supply OFF.
— 13 —