GENERAL
INTRODUCTION
Procedures in this manual will apply to all models unless specified. Pictures and illustrations can be of any model unless the picture or illustration needs to be model specific. All models are equipped with 30,000 BTU/HR burners as standard equipment. One burner is used for every 12 inches of griddle surface.
All models use an automatic spark igniter to light the burners.
INSTALLATION
Generally, installations are made by the dealer or contracted by the dealer or owner. Detailed installation instructions are included in the Installation & Operation Manual which is sent with each unit.
OPERATION
Detailed operation instruction are included in the Installation and Operation Manual which is sent with each unit.
CLEANING
Detailed cleaning procedures are included in the Installation and Operation Manual which is sent with each unit.
SPECIFICATIONS
Electrical Data
Model |
| Volts |
| Hertz |
| Phase | Amps |
924RE |
| 120 |
| 60 |
| 1 | 0.5 |
936RE |
| 120 |
| 60 |
| 1 | 0.5 |
948RE |
| 120 |
| 60 |
| 1 | 0.5 |
960RE |
| 120 |
| 60 |
| 1 | 0.5 |
972RE |
| 120 |
| 60 |
| 1 | 0.5 |
Gas Data |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Model |
| Input BTU/HR |
| Manifold Pressure | |||
|
| Natural |
| LP Gas |
| Natural | LP Gas |
924RE | 60,000 | 60,000 |
| 5.0” W.C. | 10” W.C. | ||
936RE | 90,000 | 90,000 |
| (1.1 kPa) | (2.2 kPa) | ||
948RE | 120,000 | 120,000 |
|
|
| ||
960RE | 150,000 | 150,000 |
|
|
| ||
972RE | 180,000 | 180,000 |
|
|
| ||
TOOLS
Standard
·Hand tools (standard set)
·VOM with AC current tester (any quality VOM with a sensitivity of at least 20,000 ohms per volt can be used)
·Temperature tester (thermocouple type)
·Manometer
LUBRICATION
No lubrication is required on this equipment.
— 3 — | F35628 |
