3. Mount the oven on top of the stand or cabinet (Fig. 1).
Fig. 1
Assembling the Chimney and Flue Extension
Remove the oven chimney and flue extension from the rear of the oven (motor compartment) and use the screws provided to fasten the chimney to the top rear of the oven. The flanges on the chimney are to be positioned under the top cover. Also attach the flue extension.
Electrical Connections
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE ANSI/NFPA70 (LATEST EDITION) AND/OR OTHER LOCAL ELECTRICAL CODES.
WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.
Remove the wiring compartment cover on the front of the oven. Remove the appropriate knockout on the bottom of the oven and attach the power supply conduit to the bottom of the oven.
Comply with the appropriate wiring diagram (included with this manual) when making connections to the electrical supply lines.
Replace the wiring compartment cover and turn on the power supply.
ELECTRICAL DATA
|
|
|
|
| 480V |
|
|
|
| NOMINAL AMPERES PER LINE WIRE |
|
|
|
| ||||||||
| TOTAL |
|
|
|
|
|
|
| ||||||||||||||
| KW | KW PER PHASE | KW PER PHASE |
| 208V |
|
| 240V |
|
| 480V |
| 208V | 240V | 480V | |||||||
|
| L1 | L2 | L3 | L1 | L2 | L3 | L1 | L2 | L3 | ||||||||||||
|
|
|
|
|
| |||||||||||||||||
Single Oven | 11 | 3.35 |
| 3.35 |
| 4.30 | 3.33 | 3.33 | 4.33 | 32.0 | 27.9 | 32.0 | 27.7 | 24.2 | 27.7 | 13.9 | 12.0 | 13.9 | 52.8 | 45.8 | 22.9 |
|
Stacked Oven | 22 | 6.70 |
| 6.70 |
| 8.60 | 6.66 | 6.66 | 8.66 | 64.0 | 55.8 | 64.0 | 55.4 | 48.4 | 55.4 | 27.8 | 24.0 | 27.8 | 105.6 | 91.6 | 45.8 |
|
The 208, 240, and 480 volt ovens covered by this manual are for connection to a 1- or
LEVELING
Adjust the legs to ensure that the oven racks are level in the final installed position.
– 5 –
