Vulcan-Hart GDC48 ML-52583, GDC72 ML-52585 Tools required 7/16 socket magnetic 1/4 drive

Tools required:

7/16 socket (magnetic) 1/4 drive

1/4 drive universal joint

1/4 drive 6" extension

1/4 drive ratchet

1.Remove platen cover (Fig. 3).

2.Remove all bolts from platen. Remove platen surface. (Fig. 4)

Fig. 3 Fig. 4

3.Clean surface thoroughly. Make sure all foreign particles are removed from both surfaces (Fig. 5).

4.Attach new surface to platen with new (10) short and (2) long 1/4-20 special bolts and (12) 1/4-20 locknuts. Tighten all bolts and nuts finger tight. (Fig. 6)

Fig. 5 Fig. 6

— 12 —