Vulcan-Hart GDC24 ML-52581 Installation Codes And Standards, In the United States, In Canada

INSTALLATION CODES AND STANDARDS

The GDC Series Gas Duplex Cookers must be installed in accordance with:

In the United States:

1.State and local codes.

2.National Fuel Gas Code ANSI Z223.1 (latest edition), available from American Gas Association, 1515 Wilson Blvd., Arlington, VA 22209.

3.National Electrical Code ANSI NFPA No. 70 (latest edition), and with NFPA Standard No. 96, Vapor Removal from Cooking Equipment (latest edition), available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

In Canada:

1.Local codes.

2.CAN/CGA-B149.1 Installation for Natural Gas Burning Appliances and Equipment (latest edition).

3.CAN/CGA-B149.2 Installation for Propane Burning Appliances and Equipment (latest edition), available from The Canadian Gas Association, 55 Scarsdale Road, Don Mills, Ontario, Canada M3B2R3.

4.Canadian Electrical Code Part 2, CSA Standard C22.1 (latest edition).

ASSEMBLY

Legs

The duplex cooker is shipped as a complete unit and does not require field assembly except the supporting legs or stand. Screw the legs on the four corners of the cooker, into the welded nuts. Hand tighten the legs and set in place.

Casters (Optional)

If the cooker is equipped with casters, the gas connector (available from Vulcan-Hart) must comply with the Standard for Connectors of Movable Gas Appliances, ANSI-Z21.69 (latest edition), and a quick- disconnect device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI-Z21.41 (latest edition).

When casters are installed, provide a restraining device for the gas line to limit movement of the cooker without depending on the connector and/or any quick-disconnect device or its associated piping to limit cooker movement. Attach the restraining device to a rear leg of the stand.

If it is necessary to disconnect the restraint, turn off the gas supply before disconnection. Reconnect the restraint before turning the gas supply on and returning the cooker to its installation position.

Instructions for installing casters to the cooker are included with the casters.

— 4 —