Brother Sewing Machines Memo, Winding/Installing the Bobbin, hReattach the bobbin cover

————————————————————————————————————————————————————

fInsert the bobbin with your right hand so that the thread unwinds to the left side, and then pull the thread firmly under the tab with your left hand.

a

aTab

• Be sure to insert the bobbin correctly.

CAUTION

●Be sure to install the bobbin so that the thread unwinds in the correct direction, otherwise the thread may break or the thread tension will be incorrect.

Memo

zThe order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated.

gGuide the thread through the slot, and then pull it toward you to cut it with the cutter.

a

1

b

aSlot

bCutter

XThe cutter cuts the thread.

•Make sure that the thread is correctly passed through the flat spring of the bobbin case. If it is not inserted correctly, reinstall the thread.

a

aFlat spring

hReattach the bobbin cover.

Insert the tab in the lower-left corner of the bobbin cover (A), and then lightly press down on the right side (B).

B

A

XThe lower threading is finished.

Next, thread the upper thread. Continue with the procedure in “Upper Threading” (page 28).

Memo

zYou can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread before starting to sew, pull up the thread according to the procedure in “Pulling up the bobbin thread” (page 36).

Winding/Installing the Bobbin 27