Brother Sewing Machines Getting Ready, Install the twin needle in the same way, a Needle stopper

GETTING READY ————————————————————————————————————————————

dHold the needle with your left hand, and then use a screwdriver to turn the needle clamp screw toward you (counterclockwise) to remove the needle.

fWhile holding the needle with your left hand, use the screwdriver to tighten the needle clamp screw.

a

b

Install the twin needle in the same way.

aNeedle clamp screw

bScrewdriver

•Do not apply a strong force when loosening or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged.

eWith the flat side of the needle toward the rear of the machine, insert the needle until it touches the needle stopper.

a

CAUTION

●Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the needle may break or damage may result.

aNeedle stopper

40