Brother Sewing Machines Memo, Winding/Installing the Bobbin, mPress start/stop button once

————————————————————————————————————————————————————

kPass the end of the thread through the slit in the bobbin winder seat, and then pull the thread to the right to cut it.

a

aSlit in bobbin winder seat (with built-in cutter)

XThe thread is cut to a suitable length.

CAUTION

●Be sure to cut the thread as described. If the bobbin is wound without cutting the thread using the cutter built into the slit in the bobbin winder seat, the bobbin may not be wound correctly. In addition, the thread may become tangled in the bobbin or the needle may bend or break when the bobbin thread starts to run out.

lSlide the sewing speed controller to the right (for a faster sewing speed).

aSewing speed controller

mPress (start/stop button) once.

XThe bobbin starts spinning and the thread is wound around the bobbin.

nWhen the bobbin winding becomes slow, press

(start/stop button) once to stop the

machine.

CAUTION

●When the bobbin winding becomes slow, stop the machine, otherwise the sewing machine may be damaged.

oCut the thread, slide the bobbin winder shaft to the left, and then remove the bobbin from the shaft.

pSlide the sewing speed controller back to its original position.

Memo

zWhen the sewing machine is started or the handwheel is turned after winding the bobbin, the machine will make a clicking sound; this is not a malfunction.

1

astart/stop button

Winding/Installing the Bobbin 25