Brother Sewing Machines Winding/Installing the Bobbin, a Notch b Bobbin winder shaft spring

————————————————————————————————————————————————————

aTurn on the sewing machine.

bPlace the bobbin on the bobbin winder shaft so that the spring on the shaft fits into the notch in the bobbin.

Press down on the bobbin until it snaps into place.

a

b

aNotch

bBobbin winder shaft spring

cSlide the bobbin winder shaft to the right until it snaps into place.

dRemovespool pin.the spool cap that is inserted onto the

a

b

aSpool pin

bSpool cap

ePlace the spool of thread for the bobbin onto the spool pin.

Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom.

1

•If the spool is not positioned so that the thread unwinds correctly, the thread may become tangled around the spool pin.

fSlide the spool cap onto the spool pin. Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left.

CAUTION

●If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin and the needle may break.

●Three spool cap sizes are available (large, medium and small), allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool and the needle may break.

Winding/Installing the Bobbin 23