Brother Sewing Machines operation manual Memo, Getting Ready

GETTING READY ————————————————————————————————————————————

dInsert the extra spool pin into the end of the bobbin winder shaft.

a Bobbin winder shaft b Extra spool pin

c Thread spool

eInstallthread.the thread spool and thread the upper

Memo

zWhen setting the thread spool, set it so that the thread winds off from the front of the spool.

fThread the upper thread for the right side in the same way that the upper thread for the left side was threaded.

1

aThread guide cover

•For details, refer to step h through j of “Threading the upper thread” (page 28).

gWithout passing the thread through the needle bar thread guide, manually thread the right needle.

Pass the thread through the eye of the needle from the front.

hAttach zigzag foot “J”.

•For details on changing the presser foot, refer to “Replacing the presser foot” (page 41).

CAUTION

●When using the twin needle, be sure to attach zigzag foot “J”, otherwise the needle may break or the machine may be damaged.

iTurn on the sewing machine.

XThe LCD comes on.

34