Brother Sewing Machines operation manual Installing the bobbin, Memo, Getting Ready

Remove the bobbin cover.

GETTING READY ————————————————————————————————————————————

Installing the bobbin

Install the bobbin wound with thread.

CAUTION

●Use a bobbin that has been correctly wound with thread, otherwise the needle may break or the thread tension will be incorrect.

●The bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, SFB(XA5539-151)).

1

4

23

aActual size

bThis model

cOther model

d11.5 mm (7/16 inch)

●Before installing the bobbin or replacing the needle, be sure to turn off the sewing machine, otherwise injuries may occur if start/stop button is accidentally pressed and the machine starts sewing.

Memo

zThe order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated.

aPress (needle position button) once or twice to raise the needle, and then raise the presser foot lever.

aNeedle position button

bTurn off the sewing machine.

cSlide the bobbin cover latch to the right.

a b

aBobbin cover

bLatch

XThe bobbin cover opens.

d

eHold the bobbin with your right hand and hold the end of the thread with your left.

• Be careful not to drop the bobbin.

26