Vulcan-Hart GDC60 ML-52584, GDC72 ML-52585, GDC36 ML-52582 Service and Parts Information

5.Tighten all bolts and nuts firmly (do not overtighten), with 7/16 wrench, in numerical order as shown in the diagram (Fig. 7). CAUTION: Overtightening can deform the aluminum material of the platen.

The holes in the platen surface and the heads on the special bolts are eccentric. Make sure the head of each bolt fits into the hole in the platen surface and stays there until the nut is finger tightened.

6.Reinstall platen cover (Fig. 8)

Fig. 7 Fig. 8

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning this duplex cooker, contact the Vulcan-Hart Service Agency in your area (refer to listing supplied with the duplex cooker), or Vulcan-Hart Company Service Department at the address or phone number shown on the front cover of this manual.

— 13 —