REMOVAL AND REPLACEMENT OF PARTS
COVERS AND PANELS
WARNING: SHUT OFF THE GAS BEFORE SERVICING.
Door
1.Open door and using a 5/16" wrench or ratchet, remove (2) screws securing the top door mounting bracket to the left body side channel.
2.Hold door in one hand and lift the door panel assembly off of the bottom hinge.
3.Reverse this procedure to reinstall the door panel.
Front Panel
1.Using a flat head screwdriver, remove (2) screws holding the front panel in place.
2.Remove the panel from the unit.
BURNERS
WARNING: SHUT OFF THE GAS BEFORE SERVICING.
1.Open door panel.
2.Loosen (Do not remove) the two mounting bolts at the top of each burner.
3.Push burner up while pulling the bottom of the burner forward to clear the burner nozzle.
4. Reverse the procedure to install.
3. Remove heat shield.
– 4 –
