Vulcan-Hart ML-136057, ML-136056 operation manual Leave Compartment Doors Open

Models: ML-136056 ML-136057

1 20
Download 20 pages 52.75 Kb
Page 14
Image 14
LEAVE COMPARTMENT DOORS OPEN

C24GA SERIES GAS CONVECTION STEAMERS

LEAVE COMPARTMENT DOORS OPEN

Leave the compartment doors slightly open when the steamer is not in use. When the compartment is idle, never latch the door and apply pressure to the door gasket. Leaving the gasket under pressure can cause permanent deformation and reduce gasket life.

GUIDELINES FOR MAINTAINING STAINLESS STEEL SURFACES

There are four things that will break down stainless steel and allow corrosion to develop: 1) abrasion, 2) deposits, 3) water and 4) chlorides.

Avoid rubbing with steel pads, wire brushes or scrapers that can leave iron deposits on stainless steel. Instead, use plastic scouring pads or soft cloths. For stubborn stains, use products such as Cameo, Talc or Zud First Impression. Always rub parallel to the polish lines or with the grain.

Hard water will leave deposits that promote rust on stainless steel. Treated water from softeners or certain filters can eliminate these mineral deposits. Other deposits from food or lubrication must be properly removed by cleaning. Use mild detergent and non-chloride cleaners. Rinse thoroughly. Wipe dry. Where appropriate, apply a polish recommended for stainless steel (such as Benefit or Super Sheen) for extra protection and luster.

— 14 —

Page 14
Image 14
Vulcan-Hart ML-136057, ML-136056 Leave Compartment Doors Open, Guidelines For Maintaining Stainless Steel Surfaces