OPERATION
WARNING: THE BROILER AND ITS PARTS ARE HOT. BE CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE BROILER.
CONTROLS |
|
Broiler |
|
Infinite Load Switches | — Two switches independently control the front and rear heating elements |
| in 208 and 240 volt models. The switch located on the |
| of the switch panel controls the percent |
| elements, and the switch located on the |
| panel controls the two rear elements. The percent |
| infinite load control varies from approximately 10% in the VERY LOW |
| position to 100% in the HIGH position. |
— On 480 volt models, each of the two | |
| switches control independently the front and rear sections of the |
| broiler. Input varies from full power at the HIGH position (both |
| elements connected in parallel) to MED position (one element only |
| on) to LO position (both elements connected in series). |
Grid Handle | — The distance of the grid surface from the elements is controlled by the |
| |
| locks in 13 positions over the 6" (152 mm) grid travel. |
The operator can, by independent setting of each switch, provide a wide range of broiler temperatures depending on the type and location of the broiling product.
Oven |
|
|
— | Two switches (located on the right side of the switch panel, on each | |
|
| side of the thermostat) independently control the top and bottom |
|
| heating elements. At HIGH position, the maximum element power |
|
| is utilized (elements connected in parallel); at MED position, only one |
|
| of the two elements is on (about 1/2 power); at LO position, the two |
|
| elements are connected in series (about 1/4 power); at the OFF |
|
| position, both elements are completely turned off. |
Thermostat | — | Controls the temperature of the oven from 175°F to 550°F (79°C to |
|
| 288°C). |
Indicator Light | — | (Mounted next to the thermostat.) When lit, the thermostat is calling |
|
| for heat, and when off, indicates the desired temperature is |
|
| reached. |
– 7 –