Vulcan-Hart VCD44 ML-138069 Troubleshooting, Symptom, Possible Cause, Remedy, Customer Service

VCD SERIES CHIP WARMER F-38053 (09-10)

TROUBLESHOOTING

SYMPTOM	POSSIBLE CAUSE	REMEDY
	Chip Warmer not	Plug chip warmer into correct
	plugged into power	power source as indicated on
Chip Warmer not	source.	serial data plate.
	Lighted power switch not	Press power switch to ON
operating	in ON position.	position.
		Check fuse and reset is
	No power.	necessary.
		Check GFCI switch on outlet.
GFCI or Ground
Fault Circuit	Moisture problem.	Dry moisture problem.
Indicator tripped.	Damaged: element, wire,	Contact Authorized Service
	power cord, etc.	Provider.
Chip Warmer is
connected to
power source,
power is on, but	Damaged: element, wire,	Contact Authorized Service
not heating.	power cord, motor, etc.	Provider.
Lighted power
switch is
illuminated, but
circulating fan is		Contact Authorized Service
not operating	Damaged fan, etc.	Provider

SERVICE & PARTS INFORMATION

To obtain Service and Parts information concerning this model, contact Vulcan-Hart Service Department at the address listed on the front cover of this manual or refer to our website: www.vulcanhart.com for a complete listing of Authorized Service and Parts depots.

Customer Service 1-800-814-2028

Technical Service	1-800-814-2028
Service Parts	1-800-814-2028

When calling for service, have the model number and serial number available.

10