VCD SERIES CHIP WARMER |
MAINTENANCE
CLEANING
The Warmer and its parts are hot. Be very careful when operating, cleaning, or servicing the warmer.
Always unplug electrical power supply before cleaning.
EXTERIOR:
Refer to “STAINLESS STEEL CARE.”
HEAVY-DUTY CLEANING:
For
Always rinse thoroughly.
INTERIOR:
The inside of the Chip Warmer must be cleaned each day.
1.Unplug electrical power supply.
2.Allow warmer to cool before cleaning.
3.Remove Access Panel by unlocking the clips.
4.Place Access Panel away from Chip Warmer.
5.Remove Top Door.
6.Remove all internal Baffles through back opening.
7.Using a soft, clean cloth, clean inside of warmer with a solution of mild detergent and warm water. Rinse with warm water, and wipe dry.
8.Replace Top Door and all internal Baffles.
9.Reattach Access Panel.
8
STAINLESS STEEL CARE
CLEANING:
Stainless Steel contains 70 – 80% iron, which will rust if not properly maintained. Stainless Steel also contains 12 – 30% chromium, which forms an invisible passive, protective film that shields against corrosion.
If the protective film remains intact, the stainless steel will remain intact. However, if the film is damaged, the stainless steel can break down and rust.
PREVENTIVE CARE:
To prevent stainless steel break- down, follow these steps:
1.Never use any metal tools, scrapers, files, wire brushes, or scouring pads (except for stainless steel scouring pads,) which will mar the surface.
2.Never use steel wool – which will leave behind particles that will rust.
3.Never use