VPX SERIES STEAMERS - GENERAL

GENERAL

INSTALLATION, OPERATION

AND CLEANING

Refer to the Installation & Operation Manual for specific instructions.

NOTE: Daily cleaning is required.

INTRODUCTION

Features

Requires no water or drain line connections (manual fill & manual drain)

Cast aluminum "element block" for efficient heat transfer and distribution

Field convertible to single phase or three

￿phase power

When wired for single phase, a reduced 2/3 power output is available

Steam Cooking

The VPX series steamer provides timed or continuous mode cooking in a "pressure-less" compartment. The small physical size of the steamer offers an efficient way to produce many foods in small batches. Pressure-less, convection steam cooking will steam cook fresh foods or will steam defrost and cook frozen foods providing the maximum color, flavor and nutritional value with the least expenditure of energy and labor. The "pressure-less" cooking compartment allows the operator to open and close the door, anytime during a cooking cycle.

Model Designations

￿VPX3 - 3 pan capacity* VPX5 - 5 pan capacity* *based on 2.5 inch pan depth

Exterior Dimensions

￿VPX3 - 21"w x 25"d x 25" h* VPX5 - 21"w x 25"d x 31.5" h* *Includes 4" legs and 2" steam vent height

SPECIFICATIONS

Water Requirements

Use "potable" tap water that meets the following specifications:

Hardness of 2-3 grains (34-35ppm)

￿Total dissolved solids (TDS) less than 60ppm Ph factor of 7.0 to 7.5

These specifications can easily be obtained with the use of a properly maintained water

￿softener.

2.5 gallons to fill holding pan (approximate)

Electric

 

 

AMPERAGE PER LINE (60HZ) 1

 

TOTAL

 

 

 

 

 

MODEL

3 PHASE 2

1 PHASE 2

 

KW

 

 

 

 

 

 

 

 

208V

 

240V

480V

208V

240V

 

 

 

 

 

 

 

 

VPX3

9.0 std.

25.0

 

21.7

10.9

43.3

37.5

 

 

 

 

 

 

 

6.0 3

-

 

-

-

28.9

25.0

 

 

 

 

 

 

 

 

 

 

VPX5

15.0 std.

41.7

 

36.1

18.1

72.2

62.5

 

 

 

 

 

 

 

10.0 3

-

 

-

-

48.1

41.7

 

 

 

 

 

 

 

 

NOTES: 1. Amperage values in the table are nominal.

 

Tolerance is

+5/-10%.

 

 

2.All models are shipped for three phase connections. If a single phase connection is needed, the steamer is field convertible. Requires jumper wire changes at terminal block. See wiring diagram 7264.

3.Field convertible to a reduced kw output (2/3 power connection). Requires jumper wire changes at terminal block. See wiring diagram 7264.

TOOLS

Standard

Standard set of hand tools

￿Clear silicone sealant

VOM with an AC current tester (any quality VOM with a sensitivity of at least 20,000 ohms per volt can be used)

Temperature meter & thermocouple

￿Special

Thermal Transfer Compound, Dow Corning 340 P/N 819643-2 or equivalent

NOTE: The additional tools below are required if replacing heating element assembly.

Torque wrench (in-lb.)

Tile Trowel 3/16" x 5/32" V notch; Grainger

￿catalog stock number 5LG08 or equivalent Loctite 271 or equivalent

Page 3 of 20

 

F25111 (March 2002)

 

Page 3
Image 3
Vulcan-Hart VPX5 126588, VPX3 126586 manual General, INSTALLATION, Operation Cleaning Introduction, Specifications, Tools

VPX5 126588, VPX3 126586 specifications

The Vulcan-Hart VPX3 126586 and VPX5 126588 are cutting-edge commercial cooking appliances designed to enhance efficiency and performance in commercial kitchens. Both models embody the quality and reliability that Vulcan-Hart is known for, incorporating advanced technologies to meet the demands of busy restaurants, catering services, and food preparation operations.

One of the key features of the VPX3 is its powerful cooking capabilities, powered by a robust heating system that ensures rapid heat-up times and consistent cooking temperatures. It has a spacious cooking surface, accommodating multiple pots and pans simultaneously, making it an ideal solution for high-volume cooking. The VPX3 also offers precise temperature control, allowing chefs to achieve the perfect cooking results every time.

The VPX5 takes functionality a step further with its enhanced features. It includes multiple burners, which allow for versatile cooking options, catering to various menu items simultaneously. The VPX5 is designed to provide even heat distribution, reducing cooking times while maintaining food quality. The model also boasts advanced safety features, including safety shut-off valves and easy-to-use controls, ensuring a safe working environment.

Both models are equipped with user-friendly electronic controls and a digital display, making them intuitive to operate. The robust construction using high-quality stainless steel increases durability and makes for easy cleaning, a critical aspect in busy kitchen environments. The grease filter and removable drip tray ensure that excess oils and food debris do not interrupt the cooking process, contributing to overall hygiene.

In addition to their cooking prowess, both the VPX3 and VPX5 are energy-efficient, adhering to modern energy standards and helping to lower actual operating costs. Their compact design allows them to fit into various kitchen layouts without taking up unnecessary space while still providing exceptional performance.

In conclusion, the Vulcan-Hart VPX3 126586 and VPX5 126588 exemplify superior engineering and design, making them a valuable addition to any commercial kitchen. With their powerful cooking capabilities, advanced features, and emphasis on safety and efficiency, these models are perfect for chefs looking to elevate their culinary operations.