VPX SERIES STEAMERS - REMOVAL AND REPLACEMENT OF PARTS
5.Remove mounting nuts & washers from the rear cooking compartment support legs and remove base.
6.Remove outer nut on drain valve stem and lift off drain handle assembly.
DOOR
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AT THE MAIN CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT BOX INDICATING THE CIRCUIT IS BEING SERVICED.
Removal
1.Remove top cover as outlined under "COVERS AND PANELS".
2.Open the door.
3.Pull hinge rod up.
4.Reverse procedure to install, making sure the door bushings are in place.
7.Remove manual drain valve from cooking compartment drain pipe.
8.Clean thread sealant residue from drain pipe threads and apply new sealant.
9.Install a replacement drain valve.
A.Tighten valve body so that actuator stem is pointing towards front of steamer.
10.Reverse procedure to
Page 9 of 20 |
| F25111 (March 2002) |
|
