Quick Reference to TVS600 & TVS600A Commands
8TVS600 & TVS600A Series Waveform Analyzers Reference
:DINTerchange[?] <boolean>
FUNCtion
Commands in the [SENSe:]FUNCtion and [SENSe:]DATA
subsystems control sense functions and provide a means of accessing
the data produced by the sense functions.
FUNCtion
[:ON][?] <string | CHAN1–CHAN4>
:ALL <none>
:COUNt? <none>
:OFF[?] <string | CHAN1–CHAN4>
:ALL <none>
:COUNt? <none>
:CONCurrent[?] <boolean>
:STATe? <string>, <boolean>
INITiate
Commands in the INITiate subsystem operate in combination with
the ARM and TRIGger subsystems to start signal acquisition.
INITiate
[:IMMediate] <none>
:CONTinuous[?] <boolean>
:COUNt[?] <NRf>
INPut<n>
Commands in the INPut subsystem control input coupling,
bandwidth limiting, input impedance, and so on. The input channel
number, defined at the probe connector, is shared as the parameter
<n> for the INPut<n> and VOLTage<n> commands.
INPut<n>
:COUPling[?] <AC | DC | GROund>