Quick Reference to TVS600 & TVS600A Commands
TVS600 & TVS600A Series Waveform Analyzers Reference 7
CALibration
Commands in the CALibration subsystem run the waveform analyzer
self-calibration functions.
CALibration
[:ALL][?] <none>
:RESults
[:CODE]? <none>
:VERBose? <none>
:PROBe[n][?] <none>
:RESults?
DATA?
Commands in the [SENSe:]FUNCtion and [SENSe:]DATA
subsystems control sense functions and provide a means of accessing
the data produced by the sense functions.
DATA? <string>
:PREamble? <string>
FORMat
Commands in the FORMat subsystem set the format of acquisition
record data and measurement data transferred out of the waveform
analyzer. The primary data transfer commands are CALCu-
late:DATA?, [SENse:]DATA?, and TRACe[:DATA]?.
FORMat
:BORDer[?] <NORMal | SWAPped>
[:DATA][?] <ASCii,[0] | INTeger,[16]>
:CALCulate<n>[?] <ASCii,[0] | INTeger,[16]>
:TRACe
:AATS[?] <ASCii,[0] | REAL,[32]>
:REF[?] <ASCii,[0] | REAL,[32]>