Quick Reference to TVS600 & TVS600A Commands
TVS600 & TVS600A Series Waveform Analyzers Reference 3
Commands
Some commands in the following list apply only to TVS600A
models; these commands appear in bold type.
AADVance
Commands in the [SENSe:]AADVance subsystem control how
auto-advance acquisition records are acquired and transferred to a
VXIbus controller.
AADVance
[:STATe][?] <boolean>
:COUNt[?] <NRf>
:RECord
:COUNt[?] <NRf>
:STARt[?] <NRf>
ABORT
This command in the ABORt subsystem operates in combination
with the ARM and TRIGger subsystems to stop signal acquisition.
ABORt <none>
ARM
Commands in the ARM subsystem operate in combination with the
TRIGger, INITiate, and ABORt subsystems to trigger acquisitions.
ARM[:A]
:DEFine?
[:LAYer[1]]
:SOURce[?] <BUS | ECLTrg0-1 | IECLT rg0–1 | ITTLTrg0-7
| IMMediate | TTLTrg0-7>