28
You can set the pen to position the screen cursor two different ways (see setting the tablet mapping).
•In pen mode, wherever you place the pen on the tablet, the screen cursor will jump to a corresponding point on the display screen. The screen pointer indicates pen position, and follows the movement of the pen across the tablet surface. This is the default setting for the pen.
When positioning the screen cursor and operating a pen button, the pen tip needs to be within 7 mm (0.28 inch) of the tablet surface. The pen tip does not need to touch the tablet in order to move the screen cursor or use a pen button.
16 mm (0.63 inch) proximity range
7 mm (0.28 inch) proximity
•In mouse mode you move the cursor with a “pick up and slide” motion similar to using a mouse.
28