The PL-720 Display
The Auto-Adjust Function
In order to ensure optimal display image quality, this product utilizes the Auto-Adjust function. When the Auto-Adjust function is operating, it may take a short time before the screen displays properly. The settings initiated by Auto-Adjust are saved in the display.
If the Auto-Adjust function is operating, the horizontal and vertical positions as well as the phase and pitch of the display are adjusted automatically when the display mode is received. The Auto- Adjust function becomes operational when the horizontal frequency is in the 30-80KHz and the vertical frequency is in the 50-75Hz range.
When the Auto-Adjust function is operating, only the power switch is operational.
Pen calibration may be necessary after adjusting screen position. ( → P13)
The PL-720 Power Saving Function
This product is in compliance with VESA and ENERGY STAR power-saving guidelines. When connected to a Display Power Management (DPMS)-compatible computer and graphics board, the power savings indicated below are automatically realized during times of non-operation.
Computer | Horizontal | Vertical | Picture | Power | Power Lamp |
Activity | Synchronizing | Synchronizing | Signal | Consumption | |
| Signal | Signal | | | |
Turned On | Yes | Yes | Yes | 37W or less | Blue |
Stand-by Mode | No | Yes | No | Less than 2W | Orange/Blue* |
Suspend Mode | Yes | No | No | Less than 2W | Orange/Blue* |
Off Mode | No | No | No | Less than 1W | Orange |
* Depending on the specifi cations and settings of your computer and video card, when in standby and suspend modes, the power lamp may only light up orange.
12
