Connecting PL-720
1Be sure that the power is off on both your computer and the product.
2Connect the Analog RGB cable to your computer’s display port.
3Connect the power adapter to the power cable and connect the DC power connector to the DC power input terminal. Next, plug the power cable into your electrical outlet.
4Turn on the product’s power switch.
The Power LED lamp will fl ash blue then turn orange.
5Turn on your computer.
6While looking at the LCD screen, confi gure the color resolution and size settings.
- Do not modify the refresh rate. Setting the rate to a value that exceeds the
-The color palette settings and corresponding number of colors displayed are as follows: High Color (16 bit) → 65,536 colors / True Color (24 bit) → Roughly 1,619 colors
*The number of colors is limited by the effi ciency of your computer and video card. For details, refer to the user’s manual provided by the manufacturers.
7Connect the product to the computer using the USB cable. You may notice that the pen now responds when placed near the screen surface, but will function properly only after the driver has been installed.
8Install the
8
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
