Wacom DTF-720 manual Specification, Troubleshooting for Macintosh

Troubleshooting for Macintosh

Condition

What to Do

Even when connected to the USB port, the pen is inoperable.

The product always reverts to mouse mode and the pressure function cannot be used.

-Check the connection of the USB connector. Connect directly to the computer’s USB port.

-If equipped with a USB card, the system software has probably not been installed properly.

-If you have any other high-speed, high-power USB peripherals, connect these and check and see whether they operate properly or not. If these other units operate properly, this would seem to indicate that the tablet is defective.

The tablet driver may not be properly installed. Try reinstalling it.

Specification

General Specifi cations

Physical dimensions(W D H):400 × 362 × 55.5 mm (excluding stand)

Weight:	6.0kg (including stand)
Main unit input voltage:	DC12V
Power consumption:	37 W or less (DC12 V)
Usage temperature and
humidity ranges:	5–35 degrees C, 20–80%RH (conditions where condensation does not form)
Storage temperature and
humidity ranges:	-10–60 degrees C, 20–90%RH (conditions where condensation does not form) (at 60
	degrees C maximum storage humidity is 38%; at 90% humidity, maximum storage
	temperature is 42 degrees)

LCD Display Specifi cations

Display:	a-Si TFT Active Matrix LCD
Screen size:	17 inches
Resolution (75Hz Max.):	1280 × 1024 dot (SXGA), 1024 × 768 dot (XGA), 800 x 600 dot(SVGA), 640 × 480 dot
	(VGA)
Pixel pitch:	0.264(W) × 0.264 (H) mm
Display dimensions:	337.92 × 270.36mm
Color depth:	253 level; 16,190,000 colors
Signal inputs:	Analog RGB input 0.7 Vp-p, 75Ω, straight polarity
	Synchronous inputs: TTL level, 2.2 kΩ, polarity freedom (horizontal / vertical separation
	or composite synchronous input)
	Synchronous frequency: horizontal: 30 – 80 kHz; vertical 50 – 75 Hz.(When resolution
	is 1024 × 768 dot (XGA), vertical frequency is in the 45-70Hz range)
	Scanning method: all non-interlace
Plug and Play:	DDC2B

*On rare occasions, light and dark dots may appear on a small part of the display screen. This condition does not indicate product failure.

*Afterimages may remain on the screen after still images have been displayed for a long period of time, but these will disappear after a short period of time.

Tablet Specifi cations

Reading method:	Electromagnetic induction method
Maximum reading range:	337.92 × 270.336mm
Reading resolution:	Maximum 20 lpmm (0.05 mm)
Reading accuracy:	+/- 0.5 mm; four corners( 25mm wide, 80mm long from esch corner of four "L" shaped
	area) to be +/- 2.0 mm.
Maximum reading height:	5mm
Data transfer rate:	Maximum 100 points per second
Pressure level:	512 levels
Interface:	USB

Pen Specifi cations

Pressure functions:	Pen nib switch
Pen nib switch type
/retraction motion:	Non-retractable/0.2 mm or less

Load when pen nib is switched on:30 g or less

Physical dimensions and weight:12.5 × 146.5 mm, 10 g

26

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿