21
POSITIONING
To position the screen cursor, move the pen slightly above the Cintiq screen without touching the screen surface. Press the pen tip on the screen to make a selection.
Note: Calibrating the Cintiq ensures correct alignment of the screen cursor with the pen tip. If the screen cursor does not jump to a position near the pen tip when you place the pen on the screen, then the Cintiq software driver may not be installed or is not loading. Install the driver software if necessary. Otherwise, see troubleshooting.
CLICKING
Tap the screen once with the pen tip, or touch the pen to the screen with enough pressure to register a click.
Tip: Configure Windows 7 to select when hovering the pen over an icon and to launch the icon with a single click. To turn on this feature, first open a folder. From the ORGANIZE pull- down menu choose FOLDER AND SEARCH OPTIONS. From the
GENERAL tab select
SELECT).
Press the upper side switch (when set to DOUBLE CLICK), or quickly tap the screen twice in the same place with the pen tip.
21