Wagner SprayTech 9140 owner manual High Performance Airless Sprayer, Table Of Contents, English

MODELS 9140, 9140S, 9150, 9170, 9190 AND 9210
HIGH PERFORMANCE AIRLESS SPRAYER
OWNER’S MANUAL • READ THIS MANUAL FOR COMPLETE INSTRUCTIONS
	TABLE OF CONTENTS:
This pump is available in two models: a
	SAFETY	. . 2-3
stand model and a cart model. The cart
	COMPONENTS AND DESCRIPTION	. . . 4
model is shown in this manual. All
	SETUP	. . . 5
information given for the cart model
	PLUGGING IN THE SPRAYER	. . . 6
applies to the stand model except where
	PRESSURE RELIEF PROCEDURE	. . . 6
indicated.
	PURGING AND PRIMING	. . . 7
	SPRAYING	. . . 8
	SPRAYING TROUBLESHOOTING	. . . 9
	CLEANUP	10-11
	STORAGE	. . 12
	MAINTENANCE	. . 13
	ACCESSORIES	. . 13
	FLUID SECTION	. . 14
	TROUBLESHOOTING	. . 15
	PARTS LIST	48-51
	WARRANTY	. . 52

Need help? Call us first for answers fast.

Call Wagner Spray Tech toll-free if you have any comments or problems with this product.

1-800-880-0993

Wagner Technical Service

Visit us on the world wide web!

http://www.wagnerspraytech.com

1770 Fernbrook Lane, Minneapolis, MN 55447

SPECIFICATIONS:

Weight	25 lbs (9140S)
	31 lbs (9140, 9150)
	36 lbs (9170, 9190)
	40 lbs (9210)
Capacity	Up to .25 gallon (1 liter) per minute (9140,
	9140S, 9150)
	Up to .33 gallon (1.25 liter) per minute (9170)
	Up to .42 gallon (1.6 liter) per minute (9190)
	Up to .45 gallon (1.71 liter) per minute (9210)
Power source	1/2 Hp universal motor (9140, 9140S, 9150)
	5/8 Hp permanent magnet DC motor (9170)
	3/4 Hp permanent magnet DC motor (9190)
	7/8 Hp permanent magnet DC motor (9210)
Power requirement	15 amp minimum circuit on 115 VAC, 60
	Hz current

Generator	15 amp A/C
Spraying pressure	Up to 2800 PSI
Safety features	Spray gun trigger lock and guard;
	built-in tip safety guard; priming
	knob for safe pressure release.
Capability	Sprays a variety of paints, oil
	base, latex, primers, stains,
	preservatives and other
	nonabrasive materials.
	Do not use materials with flash
	points below 70°F (21°C).

This pump should not be used with textured materials, block filler, or asphalt sealer.

0803 • Form No. 0512731G

Printed in the U. S. A. U.S. Patent No. 6,435,846 English