Installation
CAUTION
1.Never install a telephone during a lightning storm.
2.Never install a telephone in a wet location.
3.Never touch
4.Use caution when installing a telephone line.
120 VOLT OUTLET/TELEPHONE JACK
1. This phone requires a modular phone jack (RJ11) and |
a standard 120 volt outlet |
2. Plug AC adapter directly into outlet. |
3. Do not plug other appliances into outlet or have outlet |
Base Unit Installation View | E | |
|
| N |
Modular |
| G |
Standard | Telephone | L |
| Line Cord | I |
Page | Handset | |
Guide | S | |
|
| |
| Charging | H |
GRHAC/E | Contacts |
|
SUNI |
|
|
E |
|
|
| GINR |
|
Antenna |
|
|
controlled by a wall switch. |
WALL MOUNT INSTALLATION
Base unit may be mounted on a standard wall plate.
1.Insert AC adapter into back of base unit.
2.Plug the line cord into modular jack.
3.Mount base on wall plate studs and gently press until the unit locks in place.
4.Plug AC adapter directly into standard 120 volt outlet.
DESK TOP INSTALLATION
1.Plug the line cord into modular jack.
2.Press unit locking lever clicks.
3.Connect AC adapter into back of unit and plug directly into standard
AC | Dial Mode |
Adapter
SET TONE/PULSE SWITCH
| NE | H/S | RINGER |
PULSE/TO | OFF | ||
| ON |
|
AC Adapter
Jack
Handset Ringer
On/Off Switch
Back View–
Wall Mount
Installation
ANTENNAS
Adjust base antenna to upright position.
Set switch (back of base) to correct dialing mode TONE or PULSE . Please check with local Phone Company if uncertain of type of service.
3