Waterpik Technologies Electronic Chlorine Generator manual Preparing Pool/Spa Water

INSTALLATION

Installation must be performed in accordance with Local and NEC codes.

120/240 VAC

POWER

ELECTRONIC CHLORINE GENERATOR

G LDLINE

CONTROLS INC.

TO

TO SPA

FROM FROMPOOL

POOL SPA

Preparing Pool/Spa Water

Refer to page 1 for recommended chemical levels. The pool's chemistry must be balanced BEFORE activating the Aqua Rite®. NOTE: If the pool does not have new water, add 1 quart of metal remover and 1 quart of non-copper based algaecide to the pool, per manufacturers instructions. This ensures a quick, troublefree transfer to the Aqua Rite system.

Mounting the AquaRite Control

The Aqua Rite is contained in a raintight enclosure that is suitable for outdoor mount- ing. The control must be mounted a minimum of 5 ft horizontal distance (or more, if local codes require) from the pool/spa.

The control is designed to mount vertically on a flat surface with the knockouts facing downward. Because the enclosure also acts as a heat sink (disperses heat from inside the box), it is important not to block the four sides of the control. Do not mount Aqua Rite inside a panel or tight enclosed area.

9