2” TRACK 1/4” GRADUATION 8 SECTIONS HIGH OR LESS
#3 HINGE
#2 HINGE
#1 HINGE
NOTE: 2” TRACK HINGE SCHEDULE FOR DOORS LESS THAN OR EQUAL TO
Head Bolt (2)
Lift Handle
FIG.A
FIG.E
FIG.D
FIG.B
Spacer (2)
Lift Handle
Step Plate (provided on
insulated doors)
Screws (2)
FIG.C
Roller spacer (1/2” long) required on
(5) screws
STEP 3. Locate the left and right hand bottom brackets, secure the counterbalance cable using clevis pin, washer and cotter key shown in fig. B
Secure bottom bracket to section using 1/4”
( for doors over 14’2” wide use double wide bottom brackets as shown in figure G) ( For doors using Broken Cable Safety Device Refer to Fig. J and the auxiliary instructions.)
PG. 4