Wayne-Dalton 2415, 2411 warranty Sideroom Requirements, inch TRACK

EXTEND JAMBS TO OPENING HEIGHT plus

DIM Y plus 1 1/2” (MINIMUM LENGTH)

MINIMUM
HEADROOM	DIM Y
REQUIRED
	HEADER TO
(REFER TO
	SHAFT
ABOVE CHART)
	CENTERLINE

8” for 2” TRACK 12” for 3” TRACK

NOTE: HEADROOM CAN BE REDUCED 2-1/2” BY USING THE QUICK CLOSING TOP FIXTURE OR BY SHORTENING THE VERTICAL TRACKS BY

3” MAX.

TORSION SHAFTS REQUIRE 10” OF SIDEROOM FOR SOLID SHAFTS and 5”

OF SIDEROOM FOR TUBULAR

SHAFTS

SIDEROOM REQUIREMENTS

2 inch TRACK

5/16 X 1”

DRILLING /

TAPPING

SCREW

3/8 X 3” MIN.	3/8 X 3” MIN.
	SLEEVE
SLEEVE
	ANCHOR
ANCHOR
1” OVERLAP	1” OVERLAP
	1/2”- 5/8”
21/2”MIN.	21/2”MIN.
SIDE ROOM	SIDE ROOM
4 3/4”	4 3/4”
	1 1/2”
	3 1/2”
OPTIONAL	OPTIONAL
MOUNTING	MOUNTING
BRACKET	BRACKET

1” OVERLAP

1/2”- 5/8”1/2”- 5/8”

21/2”MIN.

SIDE ROOM

1 1/2”

1 1/2”	5/16 X 1”	3 1/2”
	DRILLING /
3 1/2”	TAPPING
	SCREW

FLUSH

1/2”- 5/8”

31/2”MIN.

SIDE ROOM

5/16 X 1 5/8”

1 1/2” LAG SCREW

3 1/2”

2” X 6” JAMB

IS

RECOMENDED

PRECAST WALL WITH	PRECAST WALL WITHOUT		STEEL JAMBS
CORNER ANGLE		CORNER ANGLE	2” TRACK
2” TRACK		2” TRACK
		3 inch TRACK
5/16 X 1”
DRILLING /
TAPPING
SCREW
3/8 X 3” MIN.		3/8 X 3” MIN.
		SLEEVE
SLEEVE		ANCHOR
ANCHOR			1” OVERLAP
1” OVERLAP		1” OVERLAP
	1/2”- 5/8”	1/2”- 5/8”		1/2”- 5/8”
3”MIN.		3”MIN.	3”MIN.
SIDE ROOM		SIDE ROOM	SIDE ROOM
4 3/4”		5”
			1”
1”		1”	4”
			5/16 X 1”
4”		4”	DRILLING /
			TAPPING
			SCREW
OPTIONAL		OPTIONAL
MOUNTING		MOUNTING
BRACKET		BRACKET
PRECAST WALL WITH		PRECAST WALL WITHOUT	STEEL JAMBS
CORNER ANGLE		CORNER ANGLE	3” TRACK
3” TRACK		3” TRACK

WOOD JAMBS

2” TRACK

FLUSH

	1/2”- 5/8”
5”MIN.
SIDE ROOM
1”	5/16 X 1 5/8”
4”	LAG SCREW

2” X 6” JAMB

IS

RECOMENDED

WOOD JAMBS

3” TRACK

PG. 3