Wayne-Dalton 8800 Track and Installing Wall Angle, Installing Fully Adjustable Jamb, Brackets

3	Attaching Wall Angle to Vertical
	Track and Installing Wall Angle
Tools Needed:	NOTE: If you have riveted track, skip this step.
None	If your door has fully adjustable flagangle to
	vertical track, skip this step and go to step 2.
	Hand tighten the wall angle to the vertical
	track using 1/4”- 20 x 5/8” carriage bolts and
	1/4”- 20 flange hex nuts.

Wall angle

1/4”- 20 x 5/8” carriage bolts

1/4”- 20 Flange

hex Nuts

vertical

track

INSTALLATION

4	Installing Fully Adjustable Jamb	fully adjustable
	Brackets
		jamb bracket
Tools Needed:	NOTE: If you have riveted track, skip this step.
None	If wall angle/vertical track assembly was
	supplied, skip this step and continue with step				3rd Set
	5.
	To attach the bottom jamb bracket, JB-2, locate
	the first set of quick install features of the	jamb bracket		slot
	vertical track. Align the slot in the jamb bracket
	with the slot above the quick install features in
	the vertical track. The long side of the bracket
	is placed against the track.				(1) 1/4”- 20 x 5/8”
	Fasten the jamb bracket finger tight, using (1)				carriage bolt
	1/4”- 20 x 5/8” carriage bolt and (1) 1/4”- 20
	flange hex nut.
	To attach the top jamb bracket, JB-3, locate the	(1) 1/4”- 20			vertical
		flange	quick install		track
	third set of quick install features of the vertical	hex nut	feature		1st Set
	track. Align the slot in the jamb bracket with	jamb bracket
	the slot above the quick install features in the
	vertical track. The long side of the bracket is
	placed against the track.
	Fasten the jamb bracket finger tight, using (1)
	1/4”- 20 x 5/8” carriage bolt and (1) 1/4”- 20
	flange hex nut.
			quick install		vertical
			feature		track

9

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com