Check:

a)Hose to manifold connection. Figure 35 (a).

b)Regulator to tank connection. Figure 35 (b).

c)Manifold to side burner hose connection. Figure 35 (c).

mWARNING: If there is a leak at connections

a, b or c, retighten the fitting and recheck for leaks with soap and water solution.

If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE BARBECUE. Contact your dealer.

d)Side burner hose to side burner connection. Figure 35 (d).

e)Valves to manifold connections. Figure 35 (e).

f)Hose to regulator connection. Figure 35 (f).

mWARNING: If there is a leak at connections

d, e or f, turn OFF the gas. DO NOT OPERATE THE

BARBECUE. Contact your dealer.

When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(a)(b)

(c)

(d)

(f) (e)

Step 26

Install Flavorizer Bars and Cooking Grates

You will need: five long Flavorizer Bars, eight short Flavorizer Bars and two cooking grates.

Set the long Flavorizer Bars side to side in the lower position, then set the short Flavorizer Bars front to back in the upper position in the cooking box. Figure 36.

Figure 36

The open “U” of the cooking grates goes down. Set the cooking grates onto the ledges in the cooking box. Figure 37.

Figure 37

Figure 35

24

Page 24
Image 24
Weber 3400 Series owner manual Install Flavorizer Bars and Cooking Grates