d)Unlatch the Spider Stopper Guards and remove. Figure 16.

Figure 16

e)Use an adjustable wrench to remove the thermocouple from the FlameCheck valve.

f)Remove the manifold bracket and unscrew the two wing nuts that hold the manifold to the cooking box. Pull the manifold and valve assembly out of the burners and carefully set it down. Figure 17.

View from behind cooking box

Wing nuts

Figure 17

g)Slide the burner assembly out from under the guide screw and washer in the corners of the cooking box. Figure 18.

Guide screw

Figure 18

h)Lift and twist the burner assembly slightly, to separate the crossover tube from the burners. Figure 19. Remove the burners from the cooking

box.

Crossover tube

Figure 19

i)To reinstall burners, reverse steps c) through h).

CAUTION: The burner openings must be positioned properly over the valve orifices. Figure 20a.

Check proper assembly before fastening manifold in place. Figure 20b.

(a)

Valve

Burner

(b)

Figure 20

37

Page 37
Image 37
Weber 4000 owner manual View from behind cooking box Wing nuts