MAIN BURNER IGNITION & USAGE
MAIN BURNER IGNITION
Summary lighting instructions are inside the left hand cabinet door..
mDANGER
Failure to open the lid while igniting the barbecue’s burners, or not waiting five minutes to allow the gas to clear if the barbecue does not light, may result in an explosive
Electronic Ignition System
Note: Each control knob operates an individual burner.The Electronic Ignition System ignites a burner with a spark from the igniter electrode inside the Gas Catcher™ ignition chamber.You generate the energy for the spark by pushing the electronic ignition button.You will hear it clicking.
mWARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.
Log onto www.weber.com®.
A)Open the lid (1)..
B)Make sure all burner control knobs are turned off (2).. (Push control knob in and turn clockwise to ensure that it is in the OFF position..)
C)Turn the gas supply valve on (3)..
mWARNING: Do not lean over the open barbecue.
D)Push control knob in and turn to START/HI (4)..
E)Push and hold the electronic ignition button.. You will hear it clicking (5)..
F)Check that the burner is lit by looking through the cooking grates.. You should see a flame (6)..
mWARNING: If the burner does not light in five seconds, stop, turn the control knob to OFF and wait five minutes to let the gas clear before you try again or try to light with a match.
G) To light remaining burners follow steps D through F.. ◆
TO EXTINGUISH
Push in and turn each burner control knob clockwise to the OFF position.. Turn gas supply off at the source.. ◆
OFF START/HI
2 4
5
The grill illustrated may have slight differences than the model purchased.
2
MEDIUMLOW
5
1
6
2
3
4
WWW.WEBER.COM® 13
