ADD COOKING MODULE
Caution: Use two people to lift and install the cooking module.
Lift the cooking module out of the packaging. The gas line will hang below the module.
Lower the module on an angle into the sleeve so the control panel is under the front top rail. Figure 7. Guide the gas line through he access hole in the sleeve while lowering the module.
Front | Flange |
rail |
|
View from
right
MOUNT REGULATOR BRACKET
We recommend that you install the regulator to a rigid structure. The regulator mounting bracket can be used to mount the regulator to the
The gas line from the manifold is long enough to reach the mounted regulator. We have provided the means to make an SAE flare connection. Do not use pipe sealant on this connection.
Figure 7
Lower the back of the cooking module down so it sets on the rear rail. Figure 8. Be careful not to scratch the paint of the cooking module when installing the module.
The cooking module should be level, setting on the front and rear rails.
Flange
Rear rail
Front rail
View from
right
Figure 8
7
