9.Lubricate an M10 x 75mm Bolt (5). Attach the Bench Frame (33) to the Cross Brace (30) with the M10 x 75mm Bolt and an M10 Nylon Locknut (4).
The Bench Frame must be turned as shown. Do not overtighten the Nylon Locknut.
Attach the Bumper (24) to the Bench Frame (33) with an M4 x 25mm Screw (44).
Press a 38mm x 50mm Inner Cap (16) into the Bench Frame (33).
10.Press a 38mm x 50mm Inner Cap (16) into each end of the Front Leg (20).
Lubricate an M10 x 75mm Bolt (5). Attach the Front Leg (20) to the Bench Frame (33) with the M10 x 75mm Bolt (5) and an M10 Nylon Locknut (4). Do not overtighten the Nylon Locknut.
11.Press two 38mm x 50mm Inner Caps (16) into the Leg Lever (28). Press a 1” Round Inner Cap (21) into the Front Leg. Press an Angled Round Cap (32) onto the Leg Lever.
Lubricate an M10 x 75mm Bolt (5). Attach the Leg Lever (28) to the Front Leg (20) with the M10 x 75mm Bolt (5) and an M10 Nylon Locknut (4). Do not overtighten the Nylon Locknut.
Slide a Weight Stop (45) onto the Leg Lever (28).
12.Attach both Backrest Brackets (38) to the Backrest (36) with four M6 x 16mm Screws (6). The
Backrests must be oriented as shown.
9
9 |
|
|
Lubricate | 4 |
|
5 |
| |
| 33 |
|
|
| 16 |
30 |
|
|
| 24 |
|
| 44 |
|
10 | 16 |
|
|
| |
| 4 |
|
33 |
|
|
| 20 |
|
5 |
|
|
Lubricate |
| |
| 16 |
|
11 | 4 |
|
|
| |
| 28 |
|
| 20 | 16 |
5 |
| |
32 |
| |
Lubricate |
| |
|
| |
| 21 | 45 |
|
| |
| 16 |
|
12 |
|
|
| 36 |
|
6 |
|
|
| 38 |
|
| 6 |
|
