ATTACHING THE CURL PAD
For some exercises, the Curl Pad (15) must be attached to the weight bench. Remove the 45mm Thick Square Inner Cap (57) from the Front Leg (2).
Insert the Curl Post (11) into the Front Leg (2). Align one of the adjustment holes in the Curl Post with the adjustment hole in the Front Leg. Fully tighten the Curl Knob (34) into the Front Leg.
The Lat Tower (8) can be attached in the same way.
Note: When the Curl Pad (15) or Lat Tower (8) is not in use, the 45mm Thick Square Inner Cap (57) should be inserted into the Front Leg (2).
ATTACHING THE LAT BAR
Attach the Lat Bar (17) to the Lat Cable (35) with a Cable Clip (37). Remove the Lat Bar when performing an exercise that does not require it.
8 |
15 |
11 |
57 |
34 |
2 |
35 |
37 |
17 |
11
