12.Place two Weight Bumpers (51) over the indicated holes in the Weight Base (5). Slide a Weight Guide

(15)into each of the holes.

Attach the indicated Weight Guide (15) to the Weight Base (5) with a 3/8” x 2 3/4” Bolt (46), two 3/8” Flat Washers (48), and a 3/8” Nylon Locknut (50).

Slide ten Weights (21) onto the Weight Guides (15).

Make sure the Weights are turned so the pin grooves point towards the floor.

Press a Weight Tube Bumper (18) into the lower end of the Long Weight Tube (70). Slide the Weight Tube into the center holes in the Weights (21).

Slide a Top Weight (16) onto the Weight Guides (15).

Note: Make sure the Top Weight is turned so the groove fits over the welded pin on the Weight Tube (70).

13.Place the Weight Top Frame (66) on the indicated brackets on the Uprights (1 and 2). Note: The four

Weight Guides (15) must be behind the Weight Top Frame, as shown in step 14.

Attach the Weight Top Frame (66) to the Butterfly Top Frame (33) with two 3/8” x 2 3/4” Bolts (46), a Support Plate with 4” center holes (94), and two 3/8” Nylon Locknuts (50). Do not tighten the Nylon

Locknuts yet.

Attach the Weight Top Frame (66) to the bracket on the Butterfly Upright (1) with two 3/8” x 2 3/4” Bolts (46), a Support Plate with 2 1/2” center holes (34), and two 3/8” Nylon Locknuts (50). Do not tighten the

Nylon Locknuts yet.

14.Attach the Weight Top Frame (66) to the Press Top Frame (9) with one 3/8” x 2 3/4” Bolt (46), a Support Plate with 4” center holes (94), and a 3/8” Nylon Locknut (50). Slide a 3 1/2” Pulley (24) with a Cable Trap (25) onto a 3/8” x 4” Bolt (78). Insert the Bolt through the Support Plate (94) and hand tighten a 3/8” Nylon Locknut (50) onto it.

Attach the Weight Top Frame (66) to the bracket on the Press Upright (2) with two 3/8” x 2 3/4” Bolts (46), a Support Plate with 2 1/2” center holes (34) and two 3/8” Nylon Locknuts (50). Do not tighten the Nylon

Locknuts yet.

12

15

 

 

 

 

 

 

 

16

 

 

Groove

 

 

 

Pin

 

 

 

 

70

 

 

 

18

 

Pin

21

 

 

 

 

 

Grooves

 

 

 

 

51

51

 

 

 

 

 

 

48

 

 

 

50

 

 

48

 

 

46

 

5

 

 

 

 

13

 

46

 

 

34

 

 

46

 

50

 

 

 

66

 

94

 

 

 

 

 

50

 

33

 

15

 

 

 

 

1

 

Brackets

 

14

 

46

 

66

34

50

 

 

 

 

 

 

50

 

 

9

94

 

 

 

46

 

 

 

 

 

25

 

 

 

24

78

 

 

2

 

9

Page 9
Image 9
Weider 831.159730 user manual Groove Pin Grooves Brackets