Weider 831.159730 user manual Pulley Plates are oriented as shown, Bracket is oriented as shown

25.Remove both 3 1/2” Pulleys (24) from the pre-assem- bled Adjustable Pulley Plates (23).

Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in the direction shown. Attach the Pulley and a Cable Trap (25) to the top hole in the two Adjustable Pulley Plates (23) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Make sure the Cable Trap and the

Pulley Plates are oriented as shown.

26.Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in the direction shown. Attach the Pulley to the Small Pulley Bracket (22) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon Locknut (50). Make sure the Pulley

Bracket is oriented as shown.

27.Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in the direction shown. Attach the Pulley and a Cable Trap (25) to the welded bracket on the Butterfly Base

(4)with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut

(50).Make sure the Cable Trap is oriented as shown.

25
	25
24	50
54
	23
74
26
50
	22
	57
	24
	74
27

54

74

24

25

4

50

13