16.Slide the Weight Carriage (47) onto the Lat Tower (9).
Make sure the Weight Carriage is oriented as shown.
Slide the closed loop on the Cable (45) onto the M10 x 19mm Bolt (46) in the bracket on the Weight Carriage (47). Secure the Cable with an M10 Nylon Locknut (11).
Slide a Weight Stop (53) onto each end of the weight tube on the Weight Carriage (47).
17.Insert the Lat Tower (9) into the Front Leg (19). The Lat Tower must be turned as shown. Secure the Lat Tower with the Adjustment Knob (36).
16 |
|
| 45 |
| 9 |
53 | 46 |
| |
| 47 |
| 11 |
| 53 |
17 |
|
9 |
|
| 36 |
| 19 |
11
