3.Attach the Front Leg (8) to the Frame (2) with two M10 x 65mm Bolts (18), two M10 Washers (24), and two M10 Nylon Locknuts (19).
4.Tap three 45mm Square Inner Caps (21) into the Leg Lever (4).
Tap a 1Ó Round Inner Cap (23) into the indicated end of the Weight Tube (52).
Insert the Weight Tube (52) into the indicated hole in the Leg Lever (4). Press a 1Ó Angle Cap (50) onto the indicated end of the Weight Tube.
5.Lubricate an M10 x 72mm Bolt (53). Attach the Leg Lever (4) to the Front Leg (8) with the Bolt and an M10 Nylon Locknut (19). Do not overtight- en the Nylon Locknut. The Leg Lever must be able to pivot freely.
Attach the Narrow Spacer (30) to the Leg Lever
(4) with the M8 x 58mm Bolt (49), two M8 Washers (48), and an M8 Nylon Locknut (13).
Note: The Spacer will fit tightly inside the Leg Lever.
6.Attach the Frame (2) to the Lat Tower Base (35) with two M10 x 67mm Bolts (14), two M10 Washers (24), and two M10 Nylon Locknuts (19).
3 | 19 |
| |
24 | 2 |
| |
18 | 19 |
| 8 |
4 | 21 |
| |
21 | 4 |
| |
| 52 |
| 50 |
23 | 21 |
5 | 19 |
| |
| 8 |
4 |
|
49 |
|
48 | 53ÐLubricate |
30 |
|
| 48 |
| 13 |
6 |
|
| 35 |
| 14 |
| 19 |
| 24 |
2 |
|
7
