10.Press two 25mm Square Inner Caps (28) into a Pad Tube (27). Slide the Pad Tube into a hole in the Leg Lever (5). Slide two Foam Pads (26) onto the Pad Tube.
Assemble the other Pad Tube (27) in the same manner.
11.Press a 45mm Square Inner Cap (12) into the bottom of the Curl Post (8).
Attach the Curl Pad (9) to the Curl Post (8) with two M6 x 16mm Screws (29).
12.Attach a Large Base Cap (70) to the Left Base (40) with two M4 x 16mm Screws (36). Attach another Large Base Cap to the other end of the Left Base in the same manner.
Attach the Left Base (40) to the Center Base (39) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). Do not tighten the
Locknuts yet.
Repeat this step with the Right Base (not shown).
Insert two M10 x 75m Carriage Bolts (90) up through the Center Base (39).
10 | 5 |
|
| 27 |
|
26 | 28 |
|
|
| |
| 27 | 26 |
|
| 28 |
11 |
|
|
| 9 |
|
|
| 8 |
|
| 29 |
| 12 |
|
12 |
|
|
|
| 39 |
|
| 34 |
| 90 |
|
| 32 | 70 |
70 |
|
|
| 40 |
|
36 |
|
|
9
