15.Loosen the two Adjustment Knobs (22) on the Left Safety Spotter (51) by turning them counter- clockwise. Pull both Knobs out at the same time and slide the Left Safety Spotter (51) onto the Left Uprights (43, 44) and engage and tighten the Adjustment Knobs (22) into a set of holes in the Uprights.
Repeat this step with the Right Safety Spotter (50) and Right Uprights (not shown).
16.Loosen the Adjustment Knob (22) on the Right Weight Rest (52) by turning it counterclockwise. Pull the Knob out and slide the Right Weight Rest (52) onto the Right Front Upright (110). Engage and tighten the Adjustment Knob (22) into a hole in the Upright.
Repeat this step with the Left Weight Rest (not shown) and the Left Front Upright (not shown).
17.Press a 60mm Square Inner Cap (64) into the indicated end of the Right Top Frame (47).
Attach the Right Top Frame (47) to the right Rear Upright (43) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). Do not tighten the
Locknuts yet.
Repeat this step with the Left Top Frame (not shown) and the left Rear Upright (not shown).
15 |
|
| 51 |
| 22 |
| 22 |
| 43 |
50 | 44 |
16 |
|
52 |
|
| 22 |
| 110 |
17 | 64 |
| |
| 34 |
| 47 |
| 32 |
| 43 |
11
