9.Attach the Foot Plate (67) and the Weight Guide Base (41) to the Center Base (39) with two M10 x 81mm Button Bolts (104) and two M10 Nylon Locknuts (34). Do not tighten the Locknuts yet.
10.Attach the Center Top Frame (46) to the Left Top Frame (48) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). Make sure the decal is in the indicated location. Do not tight- en the Locknuts yet.
Attach the Center Top Frame (46) to the Right Top Frame (47) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). Do not tight- en the Locknuts yet.
11.Slide the Weight Carriage Stop (65) onto the Weight Guide Upright (42) as shown, and attach it at the indicated hole with an M10 x 87mm Bolt (106) and an M10 Nylon Locknut (34).
Attach the Weight Guide Upright (42) to the Weight Guide Base (41) with two M10 x 75mm Bolts (92), four M10 Washers (35), and two M10 Nylon Locknuts (34). Do not tighten the
Locknuts yet.
9 |
|
|
|
| 34 |
|
| 41 |
67 |
| 34 |
|
| |
|
| 39 |
104 |
|
|
10 |
|
|
34 |
|
|
|
| 46 |
47 |
|
|
|
| Decal |
32 |
| 34 |
|
| 32 |
|
| 48 |
11 |
|
|
| 42 |
|
34 | 35 |
|
|
| Hole |
34 |
| 35 |
35 |
| |
|
| 92 |
|
| Hole closer |
65 | to bottom | |
|
| 106 |
|
| 41 |
10
