32.Attach a Small Base Cap (20) to the Bench Base
(3) with two M4 x 16mm Screws (36). Attach another Small Base Cap to the Bench Base in the same manner.
Attach the Bench Leg (4) to the Bench Base (3) with four M10 x 68mm Bolts (98), two Leg Plates (25), and four M10 Nylon Locknuts (34). Do not tighten the Locknuts yet.
33.Attach a Small Base Cap (20) to the Stabilizer (2) with two M4 x 16mm Screws (36). Attach anoth- er Small Base Cap to the Stabilizer in the same manner.
Attach the Bench Frame (1) to the Stabilizer (2) with two M10 x 58mm Carriage Bolts (77) and two M10 Nylon Locknuts (34). Make sure the decal is in the indicated position. Do not tight- en the Locknuts yet.
34.Attach the Bench Frame (1) to the Bench Leg (4) with four M10 x 68mm Bolts (98), two Notched Plates (24), and four M10 Nylon Locknuts (34).
Do not tighten the Locknuts yet.
32 |
|
|
|
| 4 |
| 3 | 34 |
|
| |
20 |
| 25 |
98 | 25 |
|
98 |
|
|
| 20 |
|
| 36 |
|
33 |
|
|
| 1 | 34 |
|
| |
| 20 |
|
|
| Decal |
| 2 | 20 |
|
| |
| 77 |
|
|
| 36 |
34 |
|
|
34 | 1 |
|
|
| |
| 24 |
|
| 4 |
|
| 24 | 98 |
|
|
16
