Weider WEBE37340 user manual Caps 80. Do not overtighten the Locknut

15. Press two Plastic Butterfly Bushings (79) and two	15
Metal Butterfly Bushings (93) into the Right
	Lubricate		80
Butterfly Arm (56). Wet the bottom of the Butterfly
	93
Arm with soapy water and slide a Butterfly Foam
	79		97
Pad (66) onto the Arm.
			55
Lubricate a 1/2" x 78mm Bolt (97) and the Plastic	79
Butterfly Bushings (79) with grease. Attach the
Right Butterfly Arm (56) to the Butterfly Bracket	93	94	57
(55) with the Bolt and a 1/2" Nylon Locknut (94).
Cover the Bolt and Locknut with two Butterfly	56	Lubricate	80
Caps (80). Do not overtighten the Locknut; the
Butterfly Arm must be able to pivot easily.
Repeat this step with the Left Butterfly Arm
(57).
	66
16. Attach the Butterfly Backrest (101) to the Center	16
Upright (45) with two M6 Washers (78) and two
M6 x 75mm Screws (96).
			96
			78
			45
			96
			78
	101
17. Locate the Medium Cable (69). Route the Cable	17
up through the Weight Guide Top Frame (49) and
over a Pulley (87). Attach the Pulley inside the			49
Top Frame with an M10 x 75mm Bolt (92), two
M10 Washers (35), two 17mm Spacers (89), and	34	87
an M10 Nylon Locknut (34).
	35	89
			35
		89	92
		69
	12