Weider WEBE37340 user manual Tighten the M10 Nylon Locknuts 34 used Steps

12. Insert an M10 x 19mm Bolt (102) into the bracket	12
on the Weight Carriage (62) from the side shown.		102
Slide the Weight Carriage (62) onto the Weight	62
Guide Upright (42) so that the weight tube is
toward the Center Upright (45).
	Weight
	Tube
		42
	45
13. Attach the Weight Guide Top Frame (49) to the	13
Weight Guide Upright (42) with two M10 x 75mm
	32
Bolts (92), four M10 Washers (35), and two M10
Nylon Locknuts (34). Do not tighten the
Locknuts yet.
Attach the Weight Guide Top Frame (49) to the	49	35
Center Top Frame (46) with two M10 x 78mm
Bolts (32) and two M10 Nylon Locknuts (34).	34	35
Tighten the M10 Nylon Locknuts (34) used in		35
		92
steps 1–13.	46
		35
	34	42
		34
14. Attach the Butterfly Bracket (55) to the Center	14
Upright (45) with two M10 x 78mm Bolts (32), two
M10 Washers (35), and two M10 Nylon Locknuts
(34).
		35
	32
	55	34
		35
	32
		45
	11