![](/images/new-backgrounds/1147912/14791241x1.webp)
41. Locate the Low Cable (58). Route the Cable | 41 |
| |
through the Center Upright (29). Attach two Small |
| ||
94 |
| ||
Pulleys (59) inside the Center Upright with two |
| ||
29 |
| ||
M10 x 91mm Bolts (112), four M10 Washers (96), |
| ||
and two M10 Nylon Locknuts (94). |
|
| |
| 96 |
| |
| 59 | 96 | |
| 58 | ||
|
| ||
| 59 | 112 | |
|
| ||
42. Wrap the Low Cable (58) under a Small Pulley | 42 |
| |
(59). Attach the Small Pulley and a Cable Trap |
|
| |
(76) to the first hole in the Rear Base (25) with an | 59 | 58 | |
M10 x 50mm Bolt (111) and an M10 Nylon | |||
|
| ||
Locknut (94). |
|
| |
|
| 76 | |
|
| 25 | |
| 94 | 111 | |
|
| ||
43. Wrap the Low Cable (58) under a Small Pulley | 43 |
| |
(59). Attach the Small Pulley and a Cable Trap |
| ||
|
| ||
(76) to the third hole in the Rear Base (25) with |
|
| |
an M10 x 50mm Bolt (111) and an M10 Nylon |
|
| |
Locknut (94). |
|
| |
| 94 | 58 | |
| 59 | ||
|
| ||
|
| 76 | |
|
| 25 | |
|
| 111 | |
| 21 |
|